What is meant by dual-axis movement here?
The source describes movement of the double-swing welding head. It does not establish robot axes, a numeric swing range or an automated production system.
Laser Welding Machine
VIW1500D — VIW-D Laser Welding Machine
VIW1500D welding application configuration should describe one representative joint before discussing the equipment around it. Supply the joined materials, thicknesses and drawing, then explain where the weld is required. That gives the double-swing head discussion a specific application without assuming a head description proves the result of an unknown joint.
VIW1500D is listed at 1500W and 1080nm in the VIW-D handheld laser welding range. The series describes a movable structure with wheels, a laser generator and an industrial water chiller. Its double-swing welding head is described as having dual-axis movement at the head, not as a robot-axis specification.
Technical specifications
| Specification | VIW1500D |
|---|---|
| Laser Power | 1500W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW1500D joint project brief for a representative weld
The VIW1500D joint project brief should identify the two parts, their material grades and thicknesses, the joint geometry and the weld location. Attach the current drawing and quantity. Note any unresolved fit or access details so the proposed equipment is discussed against a clearly stated requirement.
VIW2000D is listed at 2000W compared with VIW1500D at 1500W. The power difference does not define penetration, welding speed or an acceptable thickness. Keep the same material and joint information beside the comparison rather than selecting on a presumed performance increase.
The VIW-D control description includes parameter setting and monitoring, with power, speed and focus adjustment. Together with the double-swing head, these are equipment features to identify in a proposal. They do not supply an automatic recipe, a stated swing range or a validated result for the joint being submitted.
VIW1500D equipment options and access questions
VIW1500D equipment options should be discussed with access to the weld shown on the drawing. Describe how the parts will be presented and held, and identify the items you expect to provide. Head movement does not establish that every difficult location is reachable or that a fixture is included.
The table states standard fiber length of 10m and maximum support of 20m. Describe the intended machine and work positions and ask which length is supplied. The maximum-supported figure should not be treated as a default inclusion or as confirmation that a particular work arrangement has been reviewed.
Keep the initial joint separate from later applications. If more components are likely, list them as prospective work until drawings and material details are available. This prevents a response to one defined assembly from being presented as evidence for a broad group of unreviewed welding tasks.
VIW1500D quotation requirements for the head and package
VIW1500D quotation requirements should name the selected Raycus, JPT, IPG or Max source, the supplied fiber length and the water-cooled equipment arrangement. Ask for the actual supplied-item list, including the head and chiller configuration. Keep those selections attached to the current joint drawing and inquiry revision.
The interface languages listed are English, Chinese, Japanese, Korean and Russian. Working Humidity is below 70% with no condensation. Provide the destination and request setup and installation information for the proposed equipment; the language list does not by itself describe training or support services.
Retain open questions about access, part holding and equipment layout with the quotation. The linked series and adjacent power model provide the published context. Use the contact page to submit the drawing, material record and scope questions together rather than relying on a model number alone.
Product questions
What should be supplied for the first joint review?
Provide the drawing, materials, thicknesses, weld location, quantity and intended part presentation, with unresolved fit or access questions identified.
Does the 2000W comparison establish a thicker weld?
It establishes a different listed power from 1500W. A thickness, penetration or welding-speed result requires a specific application discussion.
Is a 20m fiber included automatically?
The table gives standard 10m and maximum support 20m. Ask the quotation to identify the length supplied.
What equipment should the offer describe?
Identify the source, double-swing head, supplied fiber and water-cooled arrangement, together with included items and remaining fixture or installation questions.
Related equipment and information
Compare VIW-D Laser Welding Machine models
Ready to discuss VIW1500D?
Share your material, dimensions and process. Start a conversation about the right configuration.