What should be updated when the project changes?
Identify the current joint drawing and any changed material, thickness or access detail, then record changes to cleaning or cutting tasks separately.
Laser Welding Machine
VIW2000F — VIW-F Laser Welding Machine
VIW2000F welding application configuration should track both joint revisions and changes to any additional operation in the project. A changed material, drawing or surface condition can alter the request even when the machine model is unchanged. Keep the current welding brief distinct from cleaning, cutting and weld-seam cleaning requirements.
VIW2000F is the 2000W, 1080nm model in the VIW-F handheld welding range. The series describes a wheeled movable structure, generator, industrial water chiller and four-in-one head. The four functions are welding, cleaning, cutting and welding seam cleaning; their presence does not establish a result for every revised task.
Technical specifications
| Specification | VIW2000F |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW2000F joint project brief across task revisions
The VIW2000F joint project brief should contain the current drawing, joined materials and thicknesses, weld location and quantity. Explain changes to fit or part presentation. If repeated joints appear in different assemblies, identify access differences instead of assuming the same short joint description covers every component.
VIW3000F is listed at 3000W compared with VIW2000F at 2000W. It is a power-rating comparison, not a measured improvement in welding speed, penetration or cutting capacity. Retain the same current task descriptions alongside the equipment comparison.
The control description includes parameter setting and monitoring, with power, speed and focus adjustment. These functions allow settings to be discussed for the proposed work. They do not establish an automatic recipe or confirm that an earlier setting remains suitable after material, drawing or task requirements change.
VIW2000F equipment options for the current operation list
VIW2000F equipment options should be reviewed against one current operation list. If only the weld drawing changed, keep the other task descriptions attached and unchanged. If a cleaning condition or cutting drawing changed as well, identify it separately so the revised proposal can state what it addresses.
For each required function, ask which head arrangement, accessories and setup are proposed. The four-in-one description does not mean that switching tasks requires no changes or that every material and thickness is covered. Keep unresolved requirements visible rather than treating the function names as application approval.
The source lists fiber length as standard 10m with maximum support of 20m. Describe any revised equipment-to-work position and confirm the length offered. The maximum-support entry is not evidence that 20m is standard or that a changed assembly can be reached in every intended position.
VIW2000F quotation requirements for revised equipment
VIW2000F quotation requirements should identify the chosen Raycus, JPT, IPG or Max source, supplied fiber and water-cooled configuration. Ask the head, chiller and task-specific included items to be listed. Record equipment changes separately from changes in the joint or additional-operation requirements.
The listed interface languages are English, Chinese, Japanese, Korean and Russian. Working Humidity is stated as below 70% with no condensation. Provide the destination and request current setup and installation information for the proposal. The language list should not be extended into a support-service promise.
Consolidate the current drawings, operation descriptions, equipment selections and unanswered fixture or task-change questions. Use the series and next-power-model links for published context. Send the contact page the complete revision record so the equipment offer is tied to the current work rather than older messages.
Product questions
What is the fourth function in the head description?
Welding seam cleaning is listed alongside welding, cleaning and cutting. Describe the actual seam task rather than assuming a result from the function name.
Does 3000W prove a faster process than 2000W?
The comparison gives laser-power ratings. It does not provide a cycle time, penetration result or cutting rate for the proposed work.
How should task-change requirements be settled?
Ask which accessories, configuration and setup are needed for the actual operations. Do not assume the four-in-one description means no changes are required.
What should remain with a revised offer?
Keep the current task list, drawings, selected source, supplied fiber and package items with all unanswered fixture, setup and installation questions.
Related equipment and information
Compare VIW-F Laser Welding Machine models
Ready to discuss VIW2000F?
Share your material, dimensions and process. Start a conversation about the right configuration.